Identifikasi dan Evaluasi Risiko Kegagalan Kualitas Crude Palm Oil dengan Metode FMEA: Studi Kasus di PKS Tanjung Seumatoh

Nurmalawati Nurmalawati; Pramanda Ryan

doi:10.37477/isejou.v3i1.723

Nurmalawati Nurmalawati Universitas Samudra
Pramanda Ryan Fakultas Teknik, Program Studi Teknik Industri, Universitas Samudra

DOI: https://doi.org/10.37477/isejou.v3i1.723

Keywords: CPO Quality, Tanjung Seumatoh Palm Oil Mill, Failure Mode and Effect Analysis (FMEA), Risk Priority Number (RPN), Machine Maintenance, Raw Materials, Work Method.

Abstract

This study aims to analyze the factors influencing the quality of Crude Palm Oil (CPO) at the Tanjung Seumatoh Palm Oil Mill (PKS) using the Failure Mode and Effect Analysis (FMEA) method. FMEA was employed to identify and evaluate potential failure risks that could cause the CPO quality to fall outside the company’s established standards. Based on the Risk Priority Number (RPN) calculations, the factor with the highest RPN was machine (RPN = 180), followed by raw material and work method, both with an RPN of 144. Other factors, such as environment, operator, and maintenance, did not show significant RPN values (below 120). The results indicate that poorly maintained machinery, suboptimal raw materials, and non-standard work methods are the primary causes of reduced CPO quality. To improve CPO quality, it is recommended that the company perform regular machine maintenance and modernization, ensure optimal raw material maturity through strict sorting, and enhance training and supervision of work methods. Implementing these corrective measures is expected to improve product quality and reduce the risk of failures in the production process.

References

Abdillah, A. (2020). “Penerapan Lean Manufacturing Untuk Mereduksi Waste Dengan Metode Waste Assesment Model & Value Stream Analysis Tools Pada Produk Washer Xtractor Di PT. Hari Mukti Teknik (KANABA).” 1–111. DOI:10.36055/jiss.v7i1.12338.

Adha, M. A.,Supriyanto A., and Timan, A. (2019). “Strategi Peningkatan Kualitas Lulusan Madrasah Menggunakan Diagram Fishbone.” Jurnal Keilmuan Manajemen Pendidikan 5(01):11–22. https://doi.org/10.32678/tarbawi.v5i01.1794.

Alda, T. & Tarigan, C. N. (2023). “Analisis Faktor Penyebab Serta Pengendalian Peningkatan Kadar Asam TALENTA Conference Series Analisis Faktor Penyebab Serta Pengendalian Peningkatan Kadar Asam.” EE Conference Series 6(1):106–12. doi: 10.32734/ee.v6i1.1792.

Gligorijevic N., Robajac, N., and Nedic, O. (2019). “Penerapan Total Quality Management Pada Perencanaan Kaizen Kualitas Planting Di PT Surteckariya Indonesia Dengan Metode Fisbone Berbasis Android.” Jurnal Informatika SIMANTIK 84(10):1511–18. doi: 10.1134/s0320972519100129.

Herliza, S. (2012). Analisis Faktor-Faktor Yang Mempengaruhi Kualitas Minyak (Cpo) Pada Pt. Sawit Riau Makmur Kec. Tanah Putih Kab. Rokan Hilir.

Kashi, R. Y. (2019). “Pengendalian Kualitas Crude Palm Oil (CPO) Dengan Diagram Kontrol Multivariat Exponatially Weighted Moving Avarage (MEWMA).” PRISMA, Prosiding Seminar Nasional 2:848–53. DOI:10.24014/jti.v5i2.8985..

Levia, Dinda, and Mhubaligh. (2023). “Analisis Proses Produksi CPO Untuk Mengidentifikasi Faktor-Faktor Yang Mempengaruhi Kualitas Kualitas CPO.” Jurnal Teknologi Dan Manajemen Industri Terapan 2(2):82–89. doi: 10.55826/tmit.v2i2.72.

Mikulak, R. J., McDermott, R., Beauregard, M. (2009) The Basic Of FMEA. 2nd edn. New York: CRC press. https://doi.org/10.1201/b16656.

Nurazizi, M. A. (2023). “Analisis Cacat Produk Tepung Tapioka Dengan Metode Define-Measure-Analyze-Improve-Control (Dmaic) Dan Failure Modes And Effect Analysis (Fmea) Untuk Mengurangi Deffect (Studi Kasus Pada CV Harum Mekar)”. https://repository.unissula.ac.id/29781/.

Pramanda, R., Sabardi,W., and Dewiyana. (2021). “Analisis Pengendalian Kualitas Dry Rubber Content (DRC) Menggunakan Metode Peta Control Chart Di PT. SEMADAM.” JURUTERA - Jurnal Umum Teknik Terapan 8(02):14–19. doi: 10.55377/jurutera.v8i02.5486.

radifan, fakhrus. (1). FAKTOR-FAKTOR YANG MEMPENGARUHI EKSPOR CRUDE PALM OIL INDONESIA DALAM PERDAGANGAN INTERNASIONAL. Economics Development Analysis Journal, 3(2). https://doi.org/10.15294/edaj.v3i2.3829

Rifaldo, G. (2023). “Analisis Konsistensi Kualitas Dan Rendem en Cpo Kelapa Sawit Di Pt. Ciptamas Bumi Selaras Kabupaten Kaur Provinsi Bengkulu”. http://repository.unived.ac.id/id/eprint/1293.